Multi-axis device structure

Multi-axis device first appeared in Japan, after Taiwan was introduced into China, it has a history of 20 years. Widely used in mechanical industry more than empty parts of drilling and tapping processing, can greatly improve the production and processing of tapping and drilling efficiency.

Multi-axis machine widely used in machinery industry porous parts of drilling and tapping processing. Porous parts: such as automobile, motorcycle engine box, aluminum casting shell, brake drums, brake discs, steering gear, shaft, wheel hub, differential shell head, half shaft, axle, pump, valve, hydraulic components, solar accessories, and so on.

Structure of multiracial varied, multi-axis device is mainly composed of lathe bed, cooling station, fixture, machine tool spindle unit, left or right spindle unit protection such as mechanical system, hydraulic system and electric control system composition.

1, multi-axis machine body is made of cast iron integrally cast, after artificial aging to eliminate casting stress, good rigidity and stability.

2, multi-axis device cooling station by large cutting box, small cutting box, middle clapboard, vertical multistage centrifugal pump, etc.

3, multi-axis device clamp concrete made from cast iron integral casting, to eliminate casting stress after artificial aging, the clamping oil cylinder with a standard cylinder, easy to maintenance and maintenance.

4, multi-axis device left spindle unit by gear motor, the spindle head, hydraulic sliding table, etc. Multi-axis machine equipment drilling spindle drive part adopts gear motor as a driving force, with the fuselage structure is small, smooth running, low noise characteristics.

PURROS professional custom make all kinds of multi-axis device, can be customized according to your product relative to the multiracial, unlimited number of shaft, the pitch of unlimited, can be used for drilling, tapping, greatly improve production efficiency.

Factory direct sale tapping power head

With the growing complexity of the machined part, class of accuracy and machining efficiency, axial, high speed machine tool becomes more essential conditions, power head is installed on the power tool turret, is driven by servo motor. This kind of cutter holder normally used in car milling compound machine, there are a few can be used in the driving force of knife tower on the machining center.

Launch of the new policy for machinery industry, taizhou purros machinery co., LTD. Has been updated, the purros servo precision synchronous tapping power head, high power and high performance is used for servo motor of high precision tapping machine, numerical control system. Make small aperture and blind hole tapping more accurate and higher precision.

“People-oriented” is the purros to the company’s corporate philosophy, first-class product quality, first-class corporate reputation, first-class after-sales service, is the company’s adherence to the principle. Develops unceasingly, the solid step by step, the purros, the company is willing to sincerely hand in hand, create machinery industry brilliant tomorrow!

Manufacturers selling supplies wholesale power head

Launch of the new policy for machinery industry, taizhou purros machinery co., LTD. Has been updated, the puros servo precision synchronous tapping power head, high power and high performance is used for servo motor of high precision tapping machine, numerical control system. Make small aperture and blind hole tapping more accurate and higher precision.

The purros can according to your product features, different requirements, choose the appropriate models, can also provide various parameters requirements, we can help you custom make the most suitable for your head. The purros head can match the product:

1, hydraulic dampers From low speed to high speed can be adjusted the hydraulic feed speed control device.

2, multi-axis machining head (axis) can be installed using multi-axis drilling head, which can realize high efficient machining, can, meet different processing of shaft and axle spacing requirements, PURROS rich specifications of multi-axis machining head to choose from

3, desktop support Use any processing direction, free desktop support fixed power head Angle.

The purros can according to your product features, different requirements, the requirement of each parameter are available to us, we help you make to order various suits your head.

The principle of gear tooth pitch type tapping machine

Tapping machine is a machine shell, end face, such as nuts, flange with different specifications of the hole or blind hole of the inner side of the hole of the parts work out internal threads, screws or tooth buckle mechanical processing equipment. Tapping machine is also called the tapping machine, thread tapping machine, tapping machine, automatic tapping machine, etc.

Tapping machine, drilling, reaming, tapping machine, tapping machine, etc. The highest degree of automation, automatic tapping machine, as long as the part blank into the hopper can be automatic feeder, automatic positioning, automatic clamping, automatic tapping, automatic discharging, a worker can operate multiple devices at the same time, high production efficiency, can save labor costs significantly.

Taizhou purros machinery co., LTD. The main production of various tapping machines, to introduce the principle of gear tooth pitch type tapping machines, gear tooth type tapping machines, rely on a shaft gear and shaft, gear, one revolution of the spindle feed down a ring teeth, return when the spindle inversion and return the original purros, this avoids drawing, the phenomenon of broken wires, and thread is very beautiful, the precision is high, the artifact will not be brought up, but the gear tooth type tapping machine can’t drill hole, only tapping.

Drilling power head suppliers

Taizhou purros machinery co., LTD. The main production and sales of various power head, tapping head, tapping head, pneumatic power head, drilling power head, drilling power head, drilling tapping head, servo tapping machine, tapping machine, hydraulic gear type damper, custom-made all kinds of multi-axis machine, automatic drilling machine, non-standard porous combination machine tools, etc., and external to undertake OEM ODM processing, incoming sample to map processing business. Company set up domestic and international trade, the products sell well and are exported to Europe and the United States, South Korea, Japan, Middle East, Africa and other countries or regions, renowned at home and abpurros.

Under the purros to introduce the company’s production of PR3P – 6049 model the various parameters of power head:

1, model: PR3P – 6049

2, brand: PURROS

3, no-load speed: 4900 r/M

4, drilling diameter: aluminum: Φ 5.5 MM/cast iron: Φ: 2.2 MM/steel Φ 2.2 MM

5, the main shaft trip: 80-120 – mm

6, cutting feed stroke: 0-60 mm

7, motor power: 0.55 KW

8, feed thrust: 1200 n

9, gas consumption: 3-6 l

Purros will always adhere to “improve quality, satisfy customers, perfect system, pioneering and innovative” as the quality policy, in “good faith, cooperation, learning, innovation”, under the banner of innovation, unity, forge ahead, keep improving, forge ahead, to serve the society, continuously improve the economic benefit and social benefit.

The characteristics of the electrohydraulic power head

Electro-hydraulic power pack is a collection of power head of the main movement and feed movement and control equipment of drilling power head, in order to realize its appearance is compact, electro-hydraulic power head adopts shaft embedded cylinder structure, spindle and piston rod, piston rod is hollow, containing imported rolling bearing, in order to improve the rotation accuracy of the spindle, the spindle is installed on the bearing, the synchronous belt by spline connected to the motor, cylinder block is fixed on the bracket, mounted on the piston rod hydraulic governor and stroke adjustment screw, through adjusting screw collision position switch, reset to realize power head spindle.

Power head as one of the important power components of combination machine tools and applications in the automotive industry, household appliances industry and motorcycle manufacturing brings great economic benefits, has been proved by the practice of many manufacturers at home and abroad. Power head since produced, are very popular among the masses of users.

Electro-hydraulic power head has the following features:

1, because the tool into to rotate is simultaneous, so very thin or very soft material can also be processed effectively.

2, strong adaptability, can be easily adjust the diameter of the thread processing, pitch, and stroke.

3, long stroke, accessories variety, can be easily to replace single spindle tapping head with multi-axis tapping head, can meet the needs of the user’s small batch and mass production at the same time.

4, base structure of high precision, high rigidity drilling device, spindle motor adopts high performance, high power motor, has from low speed to high speed type.

Custom power head

With the growing complexity of the machined part,, class of accuracy and machining efficiency, mechanical industry gradually emerged more and more manufacturer power head. Taizhou purros machinery co., LTD. Is located in the manufacturing industry developed new city of taizhou city, Zhejiang province.

Taizhou purros machinery co., LTD., specializing in the production and sales of drilling power head, drilling power head, tapping head, servo tapping machine, automatic drilling machine, bench drill, machinery, hydraulic damper, multi-axis device, power head jig, slide, etc. Products are exported to the Americas. Australia and other countries and regions, favored by users of praise.

Purros machinery co., LTD. Quality first, users first, prestige supreme purpose, warmly welcome new and old customers both at home and purros to visit, to sample, letter, business negotiations.

Power head shaft head more suppliers

Multi-spindle head commonly known as long drill, multiple spindle head appeared in Europe in the 1960 s, mainly aimed at the local market, after the gradual development to all over the world. Multi-spindle head starts late in our country, but as a result of multiple spindle head design, processing is simple, nearly two years developing very quickly.

Multiple spindle head is composed of two or more than two main shaft, through internal gear transmission power or universal joint, bearing, realizes the output shaft. Multi-spindle head can achieve: drilling, tapping, milling surface, through the multiple spindle head only one time can complete several or a dozen drilling and tapping. There are designed specifically for use on the machining center multi-spindle head, can implement automatic cutter replacement arm by ATC removable nipple.

PURROS has strict quality management system, professional management team, their investment factory, first-class production technology and equipment, the main production and sales of various power head, tapping power head, tapping power head, pneumatic power head, drilling power head, drilling power head, drilling tapping head, servo tapping machine, tapping machine, gear type hydraulic damper, custom make all kinds of multi-axis machine, automatic drilling machine, non-standard porous combination machine tools, etc., and external to undertake OEM ODM processing, incoming sample to map processing business.

The working principle of the power head

Power head also calls the dynamic cutter holder, is installed on the power tool turret, is driven by servo motor. This kind of cutter holder normally used in car milling compound machine, there are a few can be used in the driving force of knife tower on the machining center. Power head is mainly used for drilling, reaming processing, reaming, grooving, threading, boring, cars arc such as payment processing.

Power head with drilling power head, tapping head, milling power head, boring head, reaming, drilling power head, tapping head, mainly used in manufacturing special plane.

Power head because the tool into to rotate is simultaneous, so very thin or very soft material can also be processed effectively, and strong adaptability, can be easily adjusted processing thread diameter, pitch and schedule, base structure of high precision, high rigidity drilling device, spindle motor adopts high performance, high power motor, from low speed to high speed and is widely type.

The purros drilling power head type can be divided into: PR3P – 1, PR3P – 2, PR3P, PR5P, PR6P.Purros, according to different requirements, your product features, choosing the appropriate model, requirement of each parameter can also provide to us, we help you order is most suited to your head.

Spot supply power head

At the side of luz to introduce the general PR5P type power head can match the product:

1. The desktop support

Applicable to arbitrary processing direction, free desktop support fixed power head Angle.

2. The multi-axis machining head (multiaxial)

Can be installed using multi-axis drilling head, which can realize high efficiency drilling, can meet different processing of shaft and axle spacing requirements, PURROS rich specifications of multi-axis machining head to choose from.

3. Hydraulic damper

From low speed to high speed can be adjusted the hydraulic feed speed control device.

The purros in strict accordance with international quality standard management system, fully implement the internationalization development strategy, has realized the scientific research, design, manufacture, quality inspection, sales integration. Company has always been to “the pursuit of excellence, service customers, the good faith management, and common development” for the purpose, constantly provide customers with more quality products and perfect service.