What are the power head classification

Power head also calls the dynamic cutter holder, is installed on the power tool turret, is driven by servo motor. This kind of cutter holder normally used in car milling compound machine, there are a few can be used in the driving force of knife tower on the machining center.

Power head with the complexity of machined part, precision grade and processing efficiency, sort very much.

1, air pressure type drilling power head, drill a hole in the no hole of the workpiece. Suitable for machining holes, back to the high speed, high precision, feed force is small, light weight, easy to install, easy to use, cost savings, more suitable for the special or chamfering deburring.

2, hydraulic drilling power head type, suitable for processing large aperture, back to the low speed, feed force is big, high precision, the weight is heavy, easy to install, easy to use, costs have gone up a hydraulic station.

3, the servo type drilling power head, large Kong Xiaokong is fit for processing, feed force is big, high precision, feed line Cheng Zhun, easy to control, easy to use, is not easy to install, high cost.

4, tapping head, where there is hole tooth come out. We are using gear sample rules of feed, feed powerfully is not easy to wear and convenient adjustable pitch, general tooth from 1.0, 1.25, 1.5, 2.0.The most commonly used is the M8 * 1.25 or M12 * 1.25 teeth.

5, boring head, the original has a hole, just put the original bigger hole boring, boring head is not feed force, its feed mainly on sliding table feed. It is suitable for boring and milling plane. And grooving.

Taizhou purros machinery co., LTD., specializing in the production and sales of drilling power head, drilling power head, tapping head, servo tapping machine, automatic drilling machine, bench drill, machinery, hydraulic damper, multi-axis device, power head jig, slide, etc., welcome the masses of customers to inquire.

Porous drilling rig

Porous drill known as drilling machine, multi-axis machine, multi-axis drilling device or multiple spindle head.Is a kind of applied in mechanical field drilling, tapping machine tool equipment. A typical porous drill as long as with ordinary drilling machine can a several or even dozens of twenty hole or thread one-time treatment.

Porous drill in the spindle direction can be divided into vertical porous drilling and horizontal drilling, horizontal porous and single hole, double-sided drilling and multifaceted diamond. Porous drill is widely used in machinery industry parts of drilling and tapping processing. Such as valves, automobile, motorcycle porous components. Engine box, aluminum casting shell, brake drums, brake discs, steering gear, wheel hub, differential shell, shaft head, half shaft, axle, pump, valve, hydraulic components, solar accessories, and so on.

Porous drill in its hydraulic machine work, can be fast forward, the labor into automatic (work out), retreat quickly, stop. Compared to single shaft drill (tapping), workpiece machining accuracy high, the labor rate is fast, can effectively save the investor of human, material and financial resources.

Taizhou purros machinery co., LTD. Is specialized in producing sales of porous drill, company supply adequate, good quality, heavy contract, keep prestige, has many partners with the national and the world has established good and stable relations of cooperation.

The application of porous drill

Porous bit commonly known as drilling machine, multi-axis machine, multi-axis drilling machine or multiple spindle head. Is a kind of applied in mechanical field drilling, tapping machine tool equipment. A typical porous drill as long as with ordinary drilling machine can a several or even dozens of twenty hole or thread one-time treatment.

Porous bit in its hydraulic machine work, can be fast forward, the labor into automatic (work out), retreat quickly, stop. Compared to single shaft drill (tapping), workpiece machining precision, fast power, can effectively save the investor of human, material and financial resources.

Porous drill bits are widely used in machinery industry parts of drilling and tapping processing. Such as valves, automobile, motorcycle porous components. Engine body shell, aluminum castings, the wheel hub, brake drums, brake discs, steering gear, differential shell, shaft head, half shaft, half bridge, such as pump, valve, hydraulic components, solar accessories, and so on.

The purros main production and sales of porous drilling machine, has a strong design and development capabilities, can design according to customer’s request all kinds of multi-axis drilling machine, all kinds of special multi-axis drilling tapping machine, non-standard automatic combination machine tools and so on. Can be customized according to your product corresponding multiaxial, unlimited number of shaft, the pitch of unlimited, can be used for drilling, tapping, greatly improve production efficiency.

The use of high precision power head

PR3P-6049

Taizhou purros machinery co., LTD. Production of drilling power head, drilling power head, realize the high ratio of performance and high precision automatic feed power head, simple narrative for use under dynamic:

1, to avoid excessive wear or power tool apron internal part oil seal is damaged, cooling fluid needs to have the appropriate filter unit;

2, cannot exceed the knife holder maximum allowable water pressure;

3, confirm the internal and external water before use without blocking;

4, just center water external water spray can be close;

5, and disable the hammer knock and artifacts with external;

6, for the first time can use 70% of the maximum speed, no-load rotation for 1 hour, in order to achieve the running-in effect

7, use the tool center is out of the water;

Purros drilling, drilling power head type can be divided into: PR3P type, type PR4P, PR5P type, PR6P type, etc., you can also according to their own product features, different requirements, choose the appropriate models, can also provide various parameters requirements to us, we help you order is most suited to your head.

High precision automatic drilling power head

Launch of the new policy for machinery industry, taizhou purros machinery co., LTD. Has been updated, the purros servo precision synchronous tapping power head, high power and high performance is used for servo motor of high precision tapping machine, numerical control system. Make small aperture and blind hole tapping more accurate and higher precision.

Purros production of high precision automatic drilling power head features:

1. High precision

Played a drilling power head of core technology, thoroughly reinforced parts commonality, to critically reflect power head high precision characteristics.

2. High rigidity

The axial guideway structure, greatly improve the overall rigidity, fully guarantee the stability of hole processing.

3. High performance

Spindle end has a unique double flexible sealing structure and easy installation, round body, can meet the requirements of diverse hole processing.

Taizhou purros machinery co., LTD. With several retailers and agents established long-term, stable relations of cooperation. Company produces the product variety is complete, the price is reasonable, the company strength is abundant, the heavy credit, keep the contract, guarantee product quality, with many kinds of management characteristic and the meager profit but high turnover principle, has won the trust of customers.

Tapping machine a few big characteristics

Tapping machine is a machine tap processing of internal threads, it is the most widely used a kind of internal thread processing machine tool. Tapping machine for market, with its lightweight, flexible, efficient, and has the advantages of other similar equipment cannot be replaced, favored by the majority of users love.

The rapid development of numerical control system technology for nc machine tool technology progress. In order to meet the demand of the market, to achieve the modern manufacturing technology of numerical control technology is put forward higher request, at present, the development of numerical control technology and its equipment technical characteristics mainly embodied in the several aspects:

1, high speed, high efficiency, high speed machine tool to the direction of development, not only can greatly improve the machining efficiency, reduce processing costs, but also can improve the surface quality and machining precision of parts. Ultra-high speed machining technology for manufacturing high efficiency, high quality and low cost of production has extensive applicability.

2, high precision, from development to the ultra precision machining, precision machining is the world’s industrial powers is committed to the direction of development. Its precision from micron grade to sub-micron and nanometer level (& lt; 10 nm), and its increasingly wide range of application.

3, high reliability, with the development of numerical control machine tool network application, high reliability of nc machine tool manufacturers has become a nc system and the target of CNC machine tool manufacturers.

4, greening, metal-cutting machine tools in the 21st century must put environmental protection and energy saving as the important position, namely to realize green cutting process.

In short, the progress and development of CNC machine tool technology provides a good condition for the development of modern manufacturing, prompting manufacturing development in the direction of the high efficiency, high quality and full of human nature. Taizhou purros machinery co., LTD. Main production all kinds of tapping machine, welcome calls, letters, come kind advice.

The characteristics of the tapping move head

PR3P-3075

Purros to the tapping move head of production is to realize the high ratio of performance and high precision feed power head. Has three characteristics: a high performance, the spindle end has a unique double flexible sealing structure and easy installation, round body, can meet the requirements of diverse hole processing’s, high precision, has played a drilling power head of core technology, thoroughly reinforced parts commonality, to critically reflect power head high precision characteristics. C high rigidity, adopting axial guide rail structure, greatly improve the overall rigidity, fully guarantee the stability of hole processing.

Tapping move head can match a variety of products, the following purros, to introduce the company production of power head can match the following products:

1. Hydraulic damper, from low to high speed can be adjusted the hydraulic feed speed control device.

2. Multi-axis machining head (axis), can be installed using multi-axis drilling head, which can realize high efficient drilling processing, can meet different processing of shaft and axle spacing requirements, PURROS rich specifications of multi-axis machining head to choose from.

3. The desktop support, applicable to arbitrary processing direction, free desktop support fixed power head Angle.

You can according to their own product features, different requirements, choose the appropriate models, can also provide various parameters requirements to us, we help you custom make the most suitable for your head, welcome calls, letters, come kind advice.

Tapping vendors would

Tapping machine is a machine shell, end face, such as nuts, flange with different specifications of the hole or blind hole of the inner side of the hole of the parts work out internal threads, screws or tooth buckle mechanical processing equipment. Tapping machine is also called the tapping machine, thread tapping machine, tapping machine, automatic tapping machine, etc.

Throughout the country each machinery manufacturing region of China, the coastal city of taizhou in Zhejiang province is a relatively developed area manufacturing. Taizhou purros machinery co., LTD. The main production and sales of various power head, tapping head, tapping power head, pneumatic power head, drilling power head, drilling power head, drilling tapping head, servo tapping machine, tapping machine, hydraulic gear type damper, custom-made all kinds of multi-axis machine, automatic drilling machine, non-standard porous combination machine tools, etc., and external to undertake OEM ODM processing, incoming sample to map processing business. Company set up domestic and international trade, the products sell well and are exported to Europe and the United States, South Korea, Japan, Middle East, Africa and other countries or regions, renowned at home and abpurros.

Purros company will be backed with strong economic strength, advanced technical force as the guide, scientific management system for policy, actively pursue pioneering spirit of enterprise, combined with professional knowledge and the market feedback, we will continue to improve the management idea, strict management and implement and improve service quality, hand in hand with the customers.

Tapping machine power head factory direct sale

High-precision tapping stroke; easy adjustment, automatic reversing mechanism can free adjustment tapping stroke, shallow holes and have low holes machined part also can be easy to adjust, double safety device can prevent damage of the tap (fracture), and fluctuation of spindle, cutting AD hoc double safety clutch, spindle can automatically stop, reversed return will not damage the cutting tool.

In Zhejiang manufacture developed coastal cities, and some of the machinery manufacturing companies are increasing. Taizhou purros machinery co., LTD. Is located in taizhou Zhejiang. Purros has a strict quality management system, professional management team, their own investment factory facilities, first-class production technology and equipment, the main production and sales of various power head, tapping power head, tapping power head, pneumatic power head, drilling power head, drilling power head, drilling tapping head, servo tapping machine, tapping machine, gear type hydraulic damper, custom make all kinds of multi-axis device, porous automatic drilling machine, non-standard combination machine tools and so on.

Supply the feed type power head

With the rapid development of science and technology and the needs of large-scale industrial production, using special equipment assembled into modern high-speed lines and multifunctional and efficient combination machine tools, machine tool in many industries has become guarantee the accuracy of product, reduce the production cost, improve labor productivity, and one of the key measures of enterprise competitiveness.

Supply the feed type power head

Power head is an important power of modular machine tool parts, their quality and performance of the fit and unfit quality directly affect the whole machine tools performance is good or bad, but in general, in the design of modular machine tool power head can only provide the main movement, its feed movement was associated with hydraulic or mechanical sliding table.

The road, the main feed production power head, production of the power head has the following features:

1, high precision, has played a stick cutting power head of core technology, thoroughly reinforced parts commonality, to critically reflect power head high precision characteristics.

2, high rigidity, the axial guideway structure, greatly improve the overall rigidity, fully guarantee the stability of hole processing.

3, high performance, the spindle end has a unique double flexible sealing structure and easy installation, round body, can meet the requirements of diverse hole processing.

The road company supply adequate, good quality, heavy contract, keep prestige, many partners over the country and established a good and stable relations of cooperation. We sincerely welcome dealers at home and abroad to discuss cooperation.